Homepage | Home | Bookmarke
Member

Shenzhen M-Batt Electronics Co.,Ltd


Products
  • No Category
Search
 

Friends links
  • No link
You are here: Home » Products » Mini Printer Battery
Mini Printer Battery
Click image to view full size image
Product: Views:204Mini Printer Battery 
Unit price: Negotiable
MOQ:
Quantity:
Delivery date: Since the payment date Days delivery
Valid until: Long-term effective
Last updated: 2017-10-24 21:36
  Inquiry
Details

If you are checking China mini printer battery, mobile printer battery manufacturer and supplier, or mini printer battery chinese factory, please feel free to contact M-Batt Electronics, we are always at your service.


Model No: DF-GX001

Charge voltage: 8.4V

Nominal Voltage: 7.4V

Nominal Capacity: 2200mAh

Charge current : standard charge: 0.5C

Rapid charge : 1C

Standard charging method: 0.5CCC(constant current)charge to 4.2V,then CV(constant voltage 4.2V)charge till charge current decline to≤0.05C

Charging time Standard Charging:3.0hours(Ref.)

Rapid charge:2hours(Ref.)

Max.charge current 1C(2200mA)

Max.discharge current 1C(2200mA)

Discharge cut-off voltage 3V

Operating temperature Charging:0℃~45℃

Discharging:0℃~45℃

Storage temperature -20℃~ +60℃

Storage Humidity : 20~85%RH (not condensed)


Charging and Discharging

1. Do use suitable charger and charge with specified voltage , current and temperature, humidity.

We strongly recommend the smart battery charger.

  1. Never attempt reverse charging.

  2. Avoid over-charging.

4. Do not discharge the pack under over-discharge voltage.

5. Over-discharging may cause loss of performance, characteristics of the pack function.

6. Mechanical shock protection

7. Otherwise, it may cause shape distortion, leakage, heat generation and/or rupture.


For Safety

1. Do not short-circuit with metal wire, necklace, chains or any conductors.

2. Do not drop the pack from height.

3. Do not twist or bend the pack.

4. Do not disassemble the pack.

5. Do not use the pack when something abnormal is found such as smells,

deformation, discoloration,and so on.

6. When the electrolyte leakage occurs, do not touch the liquid.

7. Do not soak in water or get it wet.

8. Do not have the pack in the hot-temperature (more than 60℃).

9. Do not put the pack into fire.

10. Do not crush/nail the pack.

11. Do not apply solder directly to the pack.

12. Do not charge the pack nearby the fire or under the blazing sun.

13. Do not drive a nail into the pack, strike it by hammer, or tread it.

14. Do not give the pack impact or throw it.

15. Do not use the pack for other equipment.


Inquiry